Skip to content
Serving Canoga Park and nearby cities Mon–Fri: 8 AM–8 PM · Requests accepted 24/7 · (213) 320-6176

Furnace Repair in Malibu, CA

Serving Malibu and nearby cities. Tell us about the job and we’ll call you back to confirm the details.

Tell us what’s going on

Prefer to talk? (213) 320-6176

The short answer

Breezanta HVAC Repair Service repairs gas and electric furnaces in Malibu homes, coming from our Canoga Park base about 14 miles away. Most Malibu furnace problems come from long idle periods and coastal moisture, and many can be fixed without replacing the system.

Malibu homes don't run the furnace much, and that is part of the problem. A furnace that sits idle for most of the year near the ocean can develop issues that only show up on the first cold night: a burner that won't light, a blower that hums but doesn't spin, or a dusty smell that won't clear. Breezanta HVAC Repair Service drives about 14 miles southwest from our base in Canoga Park to diagnose and repair gas and electric furnaces in Malibu homes. We tell you plainly what failed, what it will take to fix, and whether a repair still makes sense for an older unit.

Why Malibu Furnaces Fail the Way They Do

Los Angeles has a Mediterranean climate with mild winters, and areas near the coast stay cooler in summer and milder overall than the inland valleys. In Malibu, that means the furnace often runs only on cool evenings and a handful of colder stretches each year. Parts that rarely move tend to stick, and dust settles on burners and sensors between heating seasons.

Moist, salty ocean air adds to the wear. Metal parts in garages, attics, and crawlspaces can corrode faster than they would inland, and electrical connections can loosen or oxidize. Fall Santa Ana winds can also push dust and debris into return vents and filters, which restricts airflow right before heating season starts.

  • Flame sensors coated with residue, causing the burner to light and then shut off
  • Corroded or loose wiring at the control board, switches, and igniter
  • Blower motors and capacitors that weaken after months of sitting idle
  • Clogged filters and dirty returns that make the furnace overheat and cycle off
  • Rust on burners, the cabinet, or venting in damp spaces near the coast

What a Furnace Repair Visit Includes

We start by asking what you noticed and when, then run the furnace through a full heating cycle. A technician checks the thermostat signal, ignition sequence, flame, gas pressure on gas units, blower operation, safety switches, and the venting. On electric furnaces, we test the heating elements, sequencers, and breakers.

Once we find the cause, we explain it in plain terms and give you the repair options before any work begins. If a part has to be ordered, we tell you what it is and what the furnace can safely do in the meantime. If we find a condition that could be unsafe, such as a cracked heat exchanger or a venting problem, we say so directly and recommend shutting the unit down until it's corrected.

Signs You Should Call for Repair

Because Malibu furnaces get so little use, many homeowners only find out something is wrong when they need heat. It's worth turning the system on for a short test in early fall, before the first cold night. Call us if you notice any of the following:

  • No heat, or air that blows cool even though the furnace is running
  • The burner lights and then shuts off within a few seconds
  • A burning dust smell that lasts more than the first few minutes of use
  • Banging, squealing, or grinding from the cabinet or ductwork
  • The furnace short-cycles, turning on and off repeatedly
  • A yellow or flickering flame on a gas furnace
  • Your carbon monoxide alarm sounds (leave the house and call the gas utility first)

Repair or Replace? What Malibu Homeowners Should Know

Many furnace problems are fixed with a single part, and with light seasonal use, a well-maintained furnace can keep going for a long time. When the heat exchanger is damaged, parts are no longer available, or repairs keep adding up, replacement may be the better choice, and we'll walk through that with you honestly.

If you're considering a new gas furnace, keep in mind that South Coast AQMD Rule 1111 limits NOx emissions from natural-gas fan-type central furnaces sold and installed in the Los Angeles region. The district has been amending the rule toward zero-emission requirements and sets and revises the compliance dates, so check the current rule before you plan a replacement.

Some homeowners use a replacement as the chance to switch to a heat pump, which handles both heating and cooling. Equipment rebates depend on which utility serves your address. Many homes outside the City of Los Angeles are served by Southern California Edison rather than LADWP, so we confirm the current offer for your home before quoting it. The federal 25C tax credit for qualifying heat pumps applied only to systems placed in service before December 31, 2025, so it does not cover new installations.

Serving Malibu and Nearby Communities

Along with Malibu, we repair furnaces in Westlake Village, Agoura Hills, Calabasas, Hidden Hills, and Thousand Oaks. When you call, let us know the furnace type, where it's located, and what it's doing, and we'll plan the visit around getting your heat back on.

More services in Malibu

Related

What to expect

How a visit goes

  1. Find the cause first

    We test and inspect before recommending parts or replacement. That way you pay to fix the actual problem, not to guess at it.

  2. Plain explanations

    We tell you what's wrong, what your options are, and what each one involves. We skip the jargon, and we never pressure you to decide on the spot.

  3. Current local information

    Rebates and equipment rules in Southern California change. We confirm what applies to your address and system before it becomes part of your decision.

FAQ

Common questions

Don’t see your question? Call (213) 320-6176 and we’ll talk it through.

Why does my furnace smell like burning when I first turn it on?

Dust settles on the burners and heat exchanger over months of non-use. A light smell for the first few minutes is normal. If it lasts longer, or smells electrical, shut the furnace off and have it checked.

Does the coastal air really affect my furnace?

It can. Salty, humid air speeds up corrosion on metal parts and electrical connections, especially in garages, attics, and crawlspaces. We check for rust and loose connections on every Malibu repair visit.

My furnace lights and then shuts off. What causes that?

A dirty flame sensor is the most common cause. Other possibilities include a clogged filter, a blocked vent, or a failing safety switch. We test each one to find the actual cause.

Should I test my furnace before winter?

Yes. Since Malibu furnaces sit idle for much of the year, run a short heating cycle in early fall and replace the filter. That way, problems show up before you actually need the heat.

Can I get a rebate if I replace my furnace with a heat pump?

Possibly. Rebates depend on whether your home is served by LADWP or Southern California Edison, and offers change. We confirm what's currently available for your address before quoting it.

Do you repair electric furnaces too?

Yes. We repair both gas and electric furnaces, including heating elements, sequencers, blower motors, and controls.

Need Heating or Cooling Help?

Tell us what's going on with your system. We'll schedule a visit, find the cause, and explain your options before any work begins.

(213) 320-6176
Call (213) 320-6176 Request Service